• Ahoy and Welcome to the New SSS Forum!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have technical questions, please take a look in Forum Q&A for potential answers. If you don't find one, post a question and one of our moderators will answer. This will help others in our community. If you need more personalized assistance, please post your questions in Contact Us and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - SSS Technical Infrastructure

Moore newbie questions

A

acoest

New member
I wanted to introduce myself and also ask a couple of newbie questions. I have a Moore 24 that is currently being refurbished at Elkhorn composites and I'd like to set it up for singlehanded racing. Since the deck is getting redone, I have the opportunity to change the deck layout.

The boat is currently set up for round the bouys racing with all sorts of fine tuning that I am planning to mostly remove to reduce complexity.
Question - Is there a deck setup for the Moore that people have found preferable? Specifically, what is often done with the adjustable backstay? Mine currently runs underneath one of the quarter births to a mainsheet pedestal with a lot of purchase that takes up a fair amount of space and makes me concerned about chafe/failure points.

Adam
 
Hi Adam - welcome!

That sounds like a fun project, and Elkhorn is a great shop. I'd try to reach Gilles (pron. "jills") Combrisson @ GC Composites in Richmond. Besides restoring at least one Moore 24 himself (along with other boats - he's a pro), Gilles is an excellent rigger who has set boats up for racing singlehanded. One example was a new J/88 for Chris Cartwright, who did a SH TransPac with it.

Another thought is that most of the value of a Moore 24 is because of the vibrant local one-design fleet. In making your changes, I would allow for adding back the more desirable controls for one-design racing, so when the time comes to move on you can get full value out of the boat.

Once you get comfortable racing the boat, you may want more of those controls anyway. Uncluttered decks are certainly a benefit but there are trade-offs. For example, when single-handing around here, you may reef a lot. With the Moore's fractional rig, you can postpone or avoid some of that reefing with a robust backstay system that will enable you to flatten the main. On my J/92, I often played the backstay upwind as much as the mainsheet. You need to be able to trim it with one arm = plenty of purchase is good!

Bob J.
 
Hi Adam,

Welcome to the SSS forum. There is no lack of excellent information from the forum members, their knowledge is extensive. In the old fashion forum manner, the responses will stay organized.

The 2nd source of excellent information is the Moore 24 fleet. If you have not been added to the group email, you should. I am not sure who manages the email list, however, owning hull #70, I am on the list.

As for the adjustable backstay, #70 still has the original traveler as Ron Moore built the boat. The traveler is double ended and comes up just forward of the traveler, and can be easily adjusted on either tack. I alway like plenty of mechanical advantage so adjustments happe easily.

Cheers,
Ants
 
You must log in or register to reply here.
Back
Top