• Ahoy and Welcome to the New SSS Forums!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have any questions, please scroll to the very bottom of the page and click "Contact Us" and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - Bryan

Bodega 30 - refit and ready to go

JakeJ

New member
Bodega 30 (Also known as a Golden Gate 30) - 5 sisterships have circumnavigated. Factory finished interior - has undergone an extensive refit over the last 4 years in preparation for the singlehanded Transpac, but my plans have changed - my loss is definitely your gain.

Recent work includes:
- New standing rigging
- New chainplates
- New prop and cutlass bearing
- New running rigging
- New Asymmetrical spinnaker
- New retractable bowsprit (for spinnaker)
- New Pelagic Autopilot (also wired into wind instrument)
- Completely new mahogany headliner
- New bimini
- New Rocna Anchor with 300' of chain
- Newly refinished teak and holly sole
- New headsail
- New LED lighting, both interior and exterior
- New stereo system
- New VHF with integrated AIS
- All new wiring and Blue Seas panel
- New refrigeration
- New Furuno wind instrument
- New solar
- Fuel tank cleaned and inspection port added
- Rebuilt head with new hoses
- New Harken self-tailing winches
- New counterpoise system for SSB
- New cockpit canvas
- New VHF antenna and coax
- Rebuilt headsail furler

The boat is further equipped with:
- Watermaker
- Raymarine 12" chartplotter with radar, depth, GPS, speed, and sonar
- Cape Horn self- steering wind vane
- Windlass
- SSB radio
- Dodger
- cockpit cushions
- mid-boom traveler
- extensive spares
- repowered with Beta Marine diesel (only 690 hours)
- setup for easy singlehanding with clutches on halyard and reefing lines
- Xantrex Prosine Inverter
- Canaflame heater
+ much more.

Bulletproof construction and almost 50% ballast will take care of you in the worst conditions, yet she moves quickly and nimbly in light airs, unlike other offshore designs - designed by Chuck Burns who also designed the Wilderness 30. USCG documented. She is literally ready to take you to Tahiti tomorrow. Asking $23,500
 

Attachments

  • 20200804_193513.jpg
    20200804_193513.jpg
    1.4 MB · Views: 2,422
  • 36450363_2019374701429919_5194497068856508416_o.jpg
    36450363_2019374701429919_5194497068856508416_o.jpg
    81.5 KB · Views: 2,333
  • Resized_20180817_160013_7415.jpeg
    Resized_20180817_160013_7415.jpeg
    782.7 KB · Views: 2,350
  • 20161122_153559.jpg
    20161122_153559.jpg
    2 MB · Views: 2,307
  • 20200805_202744.jpg
    20200805_202744.jpg
    1 MB · Views: 2,291
Last edited:
Will contact you in the morning, Ross. Almost forgot to mention, is also equipped with a Xantrex Prosine 100 inverter.

Some more photos:
 

Attachments

  • Resized_20200812_160300_7616.jpeg
    Resized_20200812_160300_7616.jpeg
    1.1 MB · Views: 2,099
  • Resized_20200812_161212_9047.jpeg
    Resized_20200812_161212_9047.jpeg
    1.1 MB · Views: 2,115
  • Resized_20200812_154231_6753.jpeg
    Resized_20200812_154231_6753.jpeg
    1.1 MB · Views: 2,163
  • Resized_20200812_154659_3089.jpeg
    Resized_20200812_154659_3089.jpeg
    1.1 MB · Views: 2,103
  • Resized_20200812_154605_5031.jpeg
    Resized_20200812_154605_5031.jpeg
    834.7 KB · Views: 2,031
Last edited:
Robert Perry's thoughts ....
 

Attachments

  • 295229_399056520121873_1582659919_n.jpg
    295229_399056520121873_1582659919_n.jpg
    77.3 KB · Views: 2,268
Bodega 30

Jake - I checked my voice mail but didn't see that you called - Please give me a call at 805-701-8160 or text me at that number and I'll get back with you. You can also reach me at [email protected].

Thanks! - Ross
 
Back
Top