• Ahoy and Welcome to the New SSS Forums!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have any questions, please scroll to the very bottom of the page and click "Contact Us" and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - Bryan

Bottom Paint

P

Phil MacFarlane

New member
Can anyone recommend a good (fast) bottom paint for a trailer boat? I want to be able to leave the boat in the water for several weeks at a time but let her rest on her trailer most of the time.

Thanks
 
I think you need an ablative bottom paint for that use (in the water for awhile, then out); for racing it needs to be a hard ablative. If you want white your choices are:

1) Interlux Micron (CSC?) - Recommended by my former diver (Matt P).

2) Trilux 33 - What I've had for nine years (wet-sailed for 6, dry-sailed for 3).

3) Vivid - The softest of the three, and mixed results from what I've heard.

Ragtime!'s bottom paint is getting thin and streaky but go give it a feel (as it were). I left it in for three months last Fall and it came clean again easily - and by then the paint job was two years old. I'll probably go with the Micron next time though, based on Matt's recommendation.

Make sure you apply a barrier coat first (Interprotect etc.).
 
Last edited:
You must log in or register to reply here.
Back
Top