-
Ahoy and Welcome to the New SSS Forums!!
As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have any questions, please scroll to the very bottom of the page and click "Contact Us" and leave a note with as much detail as possible.
You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.
Cheers - Bryan
Check your grub screws :-)
- Thread starter mike cunningham
- Start date
Philpott
Cal 2-27 Dura Mater
I'm still not clear on what a "grub screw" is, but seems to me it is similar to what happened on Sea Wisdom during the 2020 SHTP. No?
Critter
Desert Ratfox
It's the vaguely disgusting British name for what we call a set screw.
Philpott
Cal 2-27 Dura Mater
Thanks, Max. Yup, what happened to Sea Wisdom was not vaguely but flagrantly disgusting.
BobJ
Alerion 38 "Surprise!"
A grub screw is a type of set screw that has no head. It looks a bit like the larvae after which it is presumably named.
My understanding is that Sea Wisdom's "structural shelf for top bearing" detached from under the deck (ref the article's drawing) allowing the rudder bearings and tube to drop down out of place. The plywood and fiberglass structure was replaced with a metal structure but apparently this didn't completely solve the problem. I notice she's back in the water at KKMI so hopefully Will will be able to sail her again soon.
My understanding is that Sea Wisdom's "structural shelf for top bearing" detached from under the deck (ref the article's drawing) allowing the rudder bearings and tube to drop down out of place. The plywood and fiberglass structure was replaced with a metal structure but apparently this didn't completely solve the problem. I notice she's back in the water at KKMI so hopefully Will will be able to sail her again soon.