Jonathan Gutoff
New member
I've been trying to negotiate a talk between my Garmin 76 and Macbook for three weeks now. No luck. I'm using a serial to usb adapter and the Garmin software for Mac. Anyone successful with this? Bob J?
-
Ahoy and Welcome to the New SSS Forums!!
As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have any questions, please scroll to the very bottom of the page and click "Contact Us" and leave a note with as much detail as possible.
You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.
Cheers - Bryan
Garmin to Mac
- Thread starter Jonathan Gutoff
- Start date
BobJ
Alerion 38 "Surprise!"
I use one of these, which plugs right into one of the USB ports on my MacBook.
I haven't tried to get my Garmin GPS's to talk to my computer, although I think there's some discussion about it on this board - try under Hardware.
I haven't tried to get my Garmin GPS's to talk to my computer, although I think there's some discussion about it on this board - try under Hardware.
solosailor
New member
It works
I've communicated from the Mac to Garmin on both Starbuck and Outsider as well as other boats.
You have to change your setup on the Garmin from Garmin-Garmin mode to Garmin-NMEA mode for starters if you already haven't. What solved the communications issue for me several times was the ground. Make sure you are grounding everything to one point since every time I've tried to ground to multiple points I've ended up with a timing issue with NMEA.
I've communicated from the Mac to Garmin on both Starbuck and Outsider as well as other boats.
You have to change your setup on the Garmin from Garmin-Garmin mode to Garmin-NMEA mode for starters if you already haven't. What solved the communications issue for me several times was the ground. Make sure you are grounding everything to one point since every time I've tried to ground to multiple points I've ended up with a timing issue with NMEA.