• Ahoy and Welcome to the New SSS Forum!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have technical questions, please take a look in Forum Q&A for potential answers. If you don't find one, post a question and one of our moderators will answer. This will help others in our community. If you need more personalized assistance, please post your questions in Contact Us and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - SSS Technical Infrastructure

pelagic power consumption

B

Bombora

New member
I know there are lots of folks on here with loads of pelagic experience. Can someone give me an idea of a pelagic's power useage tiller-steering in mild conditions? Or not so mild? I've had mine a little while but don't have it connected with the power monitor, plus don't trust my power monitor anyway.
Thanks
Rebecca
 
In mild it should only be 1-2A but I haven't done extensive consumption test on the Pelagic, just short term. The X-5/Evo pulls 1-3A. I'd get an amp meter that does hundredths if possible.
 
1-2 amps seems about right for milder conditions.
I saw ~4.5-5 amps average on the return leg of my qualifier which was essentially classic "windy reach" conditions (22-25knots, 90AWA, 6-8' seas) over a 12 hour period.
DH
 
You must log in or register to reply here.
Back
Top