In reviewing the safety requirements, I see that the EPIRB requirement (3.16.1) does not specify whether a CAT 1 or Cat 2 is required. Before I purchase one, I would like to be certain that this omission is intended. Any insight here would be greatly appreciated (BTW, there are some really good end of the year specials on the ACR Global Fix Pro EPIRB - Cabella's $399). Thank you, Steven.
-
Ahoy and Welcome to the New SSS Forums!!
As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have any questions, please scroll to the very bottom of the page and click "Contact Us" and leave a note with as much detail as possible.
You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.
Cheers - Bryan
Safety Requirements - EPIRB
- Thread starter SV Rascal
- Start date
SharkOBluegrass
New member
Is it required to carry a full EPIRB or does a PLB satisfy the rule?
A full EPIRB is required.
SER 3.1.6 (circa 2018)
A boat shall carry a 406MHz EPIRB that is properly registered to the boat. This device shall have an internal GPS (for self-location) The MMSI number for this device shall be supplied to the Race Committee. A Personal locator beacon [PLB] may also be carried and is recommended, but does not satisfy this requirement SSS Change
there are a lot of reasons for this, documented elsewhere on the forum, but it boils down to transmit duration... you just dont have enough battery juice in a PLB for it to reliably function for long enough.
DH