• Ahoy and Welcome to the New SSS Forums!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have any questions, please scroll to the very bottom of the page and click "Contact Us" and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - Bryan

X-5 Tiller Pilot, p70 and S100 controllers - a cautionary electronics tale

J

JAMcDonald

New member
A quick note to spare others unnecessary expense and trouble. I'm configuring my Moore 24 for single handing, and a few unanticipated gybes while hoisting the spinnaker (one in the most narrow part of the Alameda Estuary - hubris) led me to purchase an X-5 core pack, along with a p70 and S100 controllers. So far so good, but the p70 and the X-5 computer are SeaTalkng compatible, and the S100 is not. You need to build a minimal SeaTalkng network comprised of just a few bits without a SeaTalkng backbone cable but is still about $150). This is all ok if you are adding additional RayMarine bits, as I am, but if you are just building an autopilot system, you may want to explore the ST6002 controller. NOTE: I EDITED THIS POST TO REMOVE REFERENCE TO THE SEATALK-1 TO SEATALKNG CONVERTER. RAYMARINE GAVE CONFLICTING ADVICE, AND THE X-5 WILL CONNECT DIRECTLY TO THE S100 VIA SEATALK-1. SORRY, JUST PASSED ON WHAT I WAS TOLD.

I'm sure this is old news for many, but new to the bewildering world of marine electronics and proprietary protocols, I thought I would share this information. I'm sure I'll learn more as I look at interfacing my SH 2150 and some arbitrary choice of chartplotter or iPad.
 
Last edited:
You must log in or register to reply here.
Back
Top