• Ahoy and Welcome to the New SSS Forum!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have technical questions, please take a look in Forum Q&A for potential answers. If you don't find one, post a question and one of our moderators will answer. This will help others in our community. If you need more personalized assistance, please post your questions in Contact Us and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - SSS Technical Infrastructure

Anyone thinking about the 2027 SHTP?

OlyJeff said:
Have you thought much about mainsail handling? I’m thinking about putting slides on the main for my Olson. I know the hardcore racers will roll their eyes, but honestly, getting the main down and stowed can be a handful, even on the light days
Click to expand...
I have had good success with low friction slugs in the bolt rope slot on the O29 - the gate and fastening it is the tricky part
 
Your picture of the Moore inside can provide me some information. How tall is the door that the Moore rolled through? Any special clearance issues?

I may have access to inside storage, however the door is 8’ 0”. Can i get the Moore through? Plenty of room after it is in.

Thanks
Ants
 
AntsUiga said:
Your picture of the Moore inside can provide me some information. How tall is the door that the Moore rolled through? Any special clearance issues?

I may have access to inside storage, however the door is 8’ 0”. Can i get the Moore through? Plenty of room after it is in.

Thanks
Ants
Click to expand...
Good question - I'm not sure and would have to measure - the door mine went through is over fifteen feet tall.
 
You must log in or register to reply here.
Back
Top