• Ahoy and Welcome to the New SSS Forum!!

    As you can see, we have migrated our old forums to new software. All your old posts, threads, attachments, and messages should be here. If you see anything out of place or have technical questions, please take a look in Forum Q&A for potential answers. If you don't find one, post a question and one of our moderators will answer. This will help others in our community. If you need more personalized assistance, please post your questions in Contact Us and leave a note with as much detail as possible.

    You should be able to login with your old credentials. If you have any issues, try resetting your password before clicking the Contact Us link.

    Cheers
    - SSS Technical Infrastructure

Not the same story

Considering my experience replacing the jib halyard sheave I'm not going to replace the spare forward masthead halyard, not now that is. There's a ring guiding the halyard so it should be fine. So one more trip to the masthead.
On another front, the AC DC shore charger wasn't working. Well, it would start then stop. The 2 Amp breaker is tripping. I tried lower charge & current settings. That worked. I suspect the breaker needs replacement.
 
Spare masthead reeving line in position. I suspect trouble; I used a 2.2 mm Dynema line to keep weight low, and it may jump the sheaves if I don't pay attention when I use it.
 
You must log in or register to reply here.
Back
Top